Organisation / IKEA SIGNUM Cable Management Tray

IKEA SIGNUM Cable Management Tray

4.2 / 5 • Aktualisiert September 2026
Organisation

Symbolbild (Stockfoto); nicht das abgebildete Produkt.

The Unglamorous Fix

Cable management is the part of a desk setup people postpone indefinitely, and the result is a nest of cables and a power strip on the floor collecting dust, blocking the vacuum and pulling on ports whenever the desk is moved.

An under-desk tray solves it in about twenty minutes. Cables and the power strip go into the tray, only the necessary lengths emerge, and the floor beneath the desk becomes empty. It is among the highest-satisfaction changes available for the money.

The SIGNUM is perforated steel, which matters for two reasons: cable ties can be threaded anywhere along it to secure individual runs, and heat from power supplies escapes rather than accumulating.

Fitting And Compatibility

It fixes to the underside of a desk with screws, which means it is not suitable for glass desks and requires a desktop thick enough to take a screw without breaking through the surface.

On a sit-stand desk it is particularly worthwhile, because a desk that moves needs its cables managed as a bundle with enough slack — an unmanaged sit-stand desk will eventually pull a cable out or trap one.

The tray is a fixed length, so on a wide desk one may not span everything and two may be needed. Measuring the run of cables before ordering is a two-minute job that avoids ordering twice.

What It Does And Does Not Solve

It handles the bulk: power strip, transformers, excess cable length, and the runs between them. The floor is cleared and the visible cabling drops to only what emerges at the desk surface.

It does not solve the cables that rise from the tray to the devices on the desk. Those still need routing, usually with adhesive clips or a sleeve, and anyone expecting a tray alone to produce a photographically clean desk will be slightly disappointed.

Nor does it help with the cable running from the desk to the wall socket, which is best handled with a spiral wrap or a single sleeve down one leg.

Against The Alternatives

Against adhesive-backed plastic trays, the steel version screws in permanently and holds far more weight, particularly with heavy power supplies in it.

Against cable boxes that sit on the floor, a tray gets everything off the floor entirely, which is the main point.

Against doing nothing, the difference to how a desk feels to use — and to clean around — is out of all proportion to the cost.

Who Should Not Buy It

Anyone with a glass desk cannot fit it, and should look at clamp-on or adhesive alternatives.

Anyone with a very thin desktop should check screw length carefully to avoid coming through the work surface.

Anyone with a desk substantially wider than the tray should plan on two, or choose a longer product.

The Verdict

A cheap, unglamorous steel tray that solves the worst-looking and most annoying part of any desk in twenty minutes.

It screws in, so it rules out glass and very thin desktops, and its fixed length may not span a wide desk.

Among the best value-for-effort improvements available to a desk setup, and particularly worthwhile under a sit-stand desk.

Auf einen Blick

Vorteile

  • Gets the power strip and cable bulk entirely off the floor
  • Perforated steel allows cable ties anywhere and lets heat escape
  • Holds heavy power supplies without sagging
  • Very inexpensive for the improvement it makes

Nachteile

  • Screws in; unsuitable for glass or very thin desktops
  • Fixed length may not span a wide desk
  • Does not manage the cables rising to desk-surface devices
  • Installation requires working underneath the desk

Häufig gestellte Fragen

Can I fit it to a glass desk?

No, it screws into the underside. For glass desks look at clamp-on trays or adhesive channels, accepting that adhesive solutions hold considerably less weight and will eventually let go under a heavy power supply.

Do I need one or two?

Measure the horizontal run your cables and power strip occupy. A standard desk is usually fine with one; wide desks or setups with several transformers often want two, and it is cheaper to order both at once.

Is it worth it on a sit-stand desk?

More than on a fixed desk. A moving desk needs its cables bundled with controlled slack, and an unmanaged one will eventually snag or unplug something as it travels. This is the cheapest way to handle that properly.

Spezifikationen

MaterialPerforated steel
FixingScrews to desk underside
LengthFixed
Suits glass desksNo
Heat handlingPerforation allows airflow
LoadHolds power strips and transformers
Cable tie pointsAnywhere along perforations
Best forSit-stand and fixed desks alike

Fazit

Twenty minutes and very little money to solve the worst part of any desk. Screws in, so no glass desks, and measure before assuming one is enough.

Preis auf Amazon prüfen